KORIDOR 11 Over the past several years, AkvaPanInženjering has intensified its engagement on design and construction of regional water-supply and sewerage networks. Working in collaboration with the AZ VIRT company, the company engages in works of regulation, drainage of precipitation, curbing, sewerage holes and construction at local roads along the Ljig – Prreljina [...]
About AdminThis author has not yet filled in any details.
So far Admin has created 33 blog entries.
Polyethylene pipes are used as channels for optical cables (as casing for optical cable, providing protection for telecommunication and electrical power cables. They are black, with the smooth outer and grooved inner surface, supplied in a range of diameters, from DN 20 to DN 110 mm and used at the working pressure of 6 bar. [...]
Stainless steel fixing fittings (NP fittings) are used for fixing flaws in a pipeline, in the event of a damaged or broken pipe, leakage of non-aggressive liquids, as well as for joining pipe without an integrated collar. The NP fitting encircles and clamps the damaged section of the pipe, sealing it and permanently stopping the [...]
Around RSD 900,000 for family companies: Akvapan, Geourb Group and Mali podrum Radovanović are the winners of the Vip BizPartner 2014 competition. Companies Akvapan from Čačak, Geourb Group from Belgrade and Mali podrum Radovanović from Krnjevo are the winners of this year’s competition and the reward Vip BizPartner 2014, which was awarded for the second time today. This is the second time that [...]
PVC pipes for greenhouses are made to 40mm diameter, and are supplied in lengths of 8m, in white colour. The pipes are primarily intended for plastic tunnel structure, but can also be used for other purposes (as long-lasting supports for creeping plants). Owing to the light weight, they are easily transported and installed. PVC pipes [...]
PVC pipes used for protection of telephone and electrical power cables are made of hard PVC, in DN 50, 75 and 10 mm diameters. The pipes are made in either yellow or red colour, supplied in rods of 4 m or 6 m length, or to the customer's requirements. The pipes are produced with a [...]
PP corrugated sewerage pipes for underground water drainage and pressure-free sewerage systems are manufactured in a Block Copolymer polypropylene (PP) extrusion process, securing a high rigidity level. Two-ply corrugated PP pipe consists of two layers of material. The outer wall of the pipe is made of two pipes, connected alongside the entire perimeter. The connection [...]
The corrugated (ring-enforced) polyethylene pipes used for protection of telecommunications and electrical power cables are made using high-density polyethylene PE80, of the DN 110 diameter. They are supplied in rods of 6m and 12 m length, or in a coil of 50 metres. The flexibility of the pipes in the coil is secured by the [...]
Polyethylene pipes for water supply are used for constructing water-supply systems and are made from high density polyethylene, PE80, PE100 and PE100-RC, in accordance with the SRPS EN 12201 (MRS ≥ 8 MPa, i.e. MRS ≥ 10 MPa) to a quality standard that guarantees undiminished strain resistance even after 50 years of use. Polyethylene [...]
Gas pipes that are used in construction of gas pipelines, made of high-density polyethylene PE80 or PE100 (MRS ≥ 8 MPa i.e. MRS ≥ 10 MPa) of a high quality that guarantees that the pipes will endure the same strain even after 50 years. The production and quality control are in accordance with the national [...]